Selecting other key numbers will disable the connection between the machine and AirPort. Note: When using AirPort, select WEP key 1 in the screen.
Select the WEP key number you want to use, then press the button.* Select Hexadecimal when it is 10 or 28 characters (digits). * Select Characters when the network key is 5 or 13 characters. * When WEP (Transitional Security Network) is selected in AirPort Utility, select WEP (128 bit) or WPA2-PSK (AES). * When WEP 40 bit is selected in AirPort Utility (AirPort Admin Utility), select WEP (64 bit).
Select a security protocol for the access point, then press the button.When using multiple access points, select Use multiple APs and then go to step 7.
#CANON PIXMA MP990 MANUAL MAC#
Select the MAC address of the target access point and then go to step 7.When you have only one access point, select Use one AP only.When multiple access points with the same name are found, select the appropriate function to proceed through the installation. * The access point names with 2-byte characters are not displayed properly, however, can be selected. * If you are living in an apartment, nearby access points in use may be detected. Select the access point name you wrote down, then press the button.When wireless connection is enabled, the Wi-Fi lamp (B) lights blue. Use the Easy-Scroll Wheel (A) to select Settings, then press the button.Wireless LAN setup - Multiple Access Points, Single SSID Use these instructions if your network has multiple AirPort Networking Devices (including Time Capsule, AirPort Extreme, AirPort Express, etc.) For example: AirPort Extreme AND Time Capsule.
0 kommentar(er)
